Remember my sneak peak? Well here is the completed artwork, all finished and mounted onto board!
It’s a multiplate print measuring 18″x24″ and titled A Bed of Lotus. Creating the artwork was a fun challenge, especially the surrounding abstract section, which was worked over quite a bit. Mounting it was an even greater challenge due to its large size. It required precise trimming of the paper, brushing of acrylic medium on both the back of the paper and front of the board and then some very careful aligning of both elements and pressing down to ensure that all would be glued together with no air bubbles. I used some strong muscle with a baren over wax paper on the piece to push down the paper which continually wanted to curl upwards. Finally I weighted everything down overnight to firm the bond.
I painted the sides of the board prior to mounting the print and waxed them to seal afterwards. A close up of one side is shown below.
Mounting the piece rather than framing behind glass was a little scary, so much could have gone wrong, but the final result is very pleasing and impactful as there is no glass to blunt the view of the print. It’s a much lighter piece to move around as well! A few more details are below.
I intend to submit A Bed of Lotus to a show but if you’d like to save me the trouble I am offering it this week at $750.